友情链接1:量皮机 Leather Measuring Machine Leather Spraying Machine

150W DC-DC LED driver
  • 150W DC-DC LED driver

150W DC-DC LED driver

Model  Product Model NSP150-U0360A4-DZ00              
Output  DC Voltage 36V      
constant current region 
2136V    
Rated current 3.5A          
Rated power 126W    
Ripple and noise <500mVP-P    
Linear regulation  ±3%    
Load regulation  ±5%    
Start the rise time 120mSFULL LOAD  
Boot output delay time  140mS(FULL LOAD230VAC  
 Input 
Voltage Range  80160VDC  
Frequency range 4763HZ  
Power factor  PF>0.95/160VDC  
Efficiency       90%    
AC current 1.6A/160VDC  
Protection Over Current  95108%  
 Protection modes: constant current limit, load can be automatically restored after removing abnormal conditions   
Over Voltage  3637    
 Protected mode: close the output voltage, restart after recovery  
Over temperature 110%  
Environment Working temperature   -20~60  
Working humidity   20~95%RH,No condensation   
Storage temperature humidity  -40~80℃,10~95%RH  
The temperature coefficient of  ±0.03%/℃(0~50℃)  
Resistance to vibration   10500Hz,5G12Minutes per cycleX.Y.ZAxis 20 minutes each   
Safety and electromagnetic compatibility Safety standard  CE
HI-POT  I/P~O/P:3.75KVAC I/P~FG:2KVAC O/P~FG0.5KVAC  
Conduction, radiation test   Meets EN55022, CLASS B, full load test
Other size  L×W×H=210*73*45mm  
packaging     
Note 1.All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25 of ambient temperature.  
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12"twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.  
3.Tolerance : includes design tolerance, line regulation and load regulation.  
4.Low input voltage condition requires decrease the output details, please refer to the static curve (pic 3).  
5.Constant current operation region is within 65% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please confirm special electrical requirements for some specific system design again.  
6.The power supply is considered as a component which will be used with final equipment together. Since EMI function will be influenced by the final equipment, the final equipment manufacturers must confirm EMI function again  
7.Suggested  connected LED directly, is not suitable for external drives.  
       
Mechanical Specification    
        Unitmm  
       
DC-DC 150W.png