友情链接1:量皮机 Leather Measuring Machine Leather Spraying Machine

15W Power Supply Plastic Case
  • 15W Power Supply Plastic Case
Model  Product Modle  NSP015-C2000B1-HZ00 NSP015-C4500B1-HZ00      
Output  DC Voltage 60V 36V    
constant current region 
30~60V 28~36V  
Rated current 200mA 450mA      
Rated power 15W 15W  
Ripple and noise <1VP-P <1VP-P  
Linear regulation  ±3% ±3%  
Load regulation  ±5% ±5%  
Start the rise time 120mS(FULL LOAD)
Boot output delay time  140mS(FULL LOAD)230VAC
 Input 
Voltage Range  200~240VAC
Frequency range 47~63HZ
Power factor  PF>0.968/230VAC
Efficiency       81% 81%  
AC current 0.15A/230V
Protection Over Current  95~108%
 Protection modes: constant current limit, load can be automatically restored after removing abnormal conditions 
Over Voltage  61~80 31~50  
 Protected mode: close the output voltage, restart after recovery
Over temperature /
Environment Working temperature   -20~40℃
Working humidity   20~95%RH,No condensation 
Storage temperature humidity  -40~80℃,10~95%RH
The temperature coefficient of  ±0.03%/℃(0~50℃)
Resistance to vibration   10~500Hz,5G12Minutes per cycle,X.Y.ZAxis 20 minutes each 
Safety and electromagnetic compatibility Safety standard CCC
HI-POT  I/P~O/P:3.75KVAC
Conduction, radiation test  GB19510.14-2009,GB19510.1-2009,GB/T17743-2007
Other size L×W×H=102*40*26mm
packaging   
Note 1.All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25℃ of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12"twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3.Tolerance : includes design tolerance, line regulation and load regulation.
4, Low input voltage condition requires decrease the output details, please refer to the static curve (pic 3).
5.Constant current operation region is within 65% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please confirm special electrical requirements for some specific system design again.
6.The power supply is considered as a component which will be used with final equipment together. Since EMI function will be influenced by the final equipment, the final equipment manufacturers must confirm EMI function again
7.Suggested  connected LED directly, is not suitable for external drives.
       
Mechanical Specification

 

 

 

 

 

 

      Unit:mm

     
       
       
 


 



 


Features:        
1. Constant current  mode LED power supply.  
2. AC input range (200-240VAC)  
3. Withstand 3750VAC surge input for 5 seconds.  
4. Available for customizing output current/voltage.  
5. Protections:Short Circuit/Over load/Over Voltage.  
6. Cooling by free air convection.  
7. 2~3 times burn-in tests with 100% full load for more than 24 hours.  
8. 3 years warranty.  
   
       

In the same category